3D Printing
Step 1: Print the custom components
Using the slicer that comes with your 3d printer, slice thent the following parts, and then print them.
Some parts require support. A brim is advised for all parts.
| Qty | Item | Material | File | Supports Required? |
|---|---|---|---|---|
| 1 | bottom | 50 g of PLA | bottom_v1.3.stl | No |
| 4 | rack legs | 240 g of PLA | Rack_Leg_21_Units.stl | No |
| 1 | stuff shelf | 50 g of PLA | Stuff_Shelf_1.0.stl | No |
| 1 | ap mount top | 40 g of PLA | AP_Mount_for_1430New_v1.5_Top.stl | Yes |
| 1 | ap mount bottom | 40 g of PLA | AP_Mount_for_1430New_v1.5_Top.stl | Yes |
| 1 | power box | 60 g of PLA | Power_Box_v1.3.stl | No |
| 1 | nuc shelf | 50 g of PLA | Tall_NUC_Shelf_v1.2.stl | No |
| 1 | netgate shelf | 50 g of PLA | SG-1100_Shelfv1.1.stl | No |
| 1 | omni shelf | 50 g of PLA | Omni_20_v1.5.stl | No |
| 1 | omni shelf lid | 25 g of PLA | Omni_20_Top_v1.5.stl | No |
| 1 | patch panel | 50 g of PLA | Keystone_Patch_Panel_2_Unitsv2.1.stl | No |
| 1 | unifi switch shelf | 50 g of PLA | USW-Flex_Shelfv1.2.stl | No |
| 1 | usb power shelf | 50 g of PLA | USB_Hub_Shelf_v1.2.stl | No |
| 1 | ssd shelf | 50 g of PLA | Dual_SSD_Shelf-_v2.0.stl | No |
| 1 | raspberry pi shelf | 50 g of PLA | RPi_4B_Shelf_v1.3.stl | No |
You can download all of the STLs as a single zipfile
Step 2: Remove the brim
Remove the brim with a utility knife